Міжнародні стандарти ISO/TC 102, які прийняті і є наявними у фонді нормативних документів секретаріату ТК 9

1. ISO 2596:2006 Iron ores -- Determination of hygroscopic moisture in analytical samples -- Gravimetric, Karl Fischer and mass-loss methods

2. ISO 2597-1:2006 Iron ores -- Determination of total iron content -- Part 1: Titrimetric method after tin(II) chloride reduction

3. . ISO 2597-2:2008 Iron ores -- Determination of total iron content -- Part 2: Titrimetric method after titanium(III) chloride reduction

4. ISO 2598-1:1992 Iron ores -- Determination of silicon content -- Part 1: Gravimetric methods

5. ISO 2598-2:1992 Iron ores -- Determination of silicon content -- Part 2: Reduced molybdosilicate spectrophotometric method

6. ISO 2599:2003 Iron ores -- Determination of phosphorus content -- Titrimetric method

7. ISO 3082:2009 Iron ores -- Sampling and sample preparation procedures

8. ISO 3084:1998 Iron ores -- Experimental methods for evaluation of quality variation

9. ISO 3085:2002 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and mesasurement

10. ISO 3086:2006 Iron ores -- Experimental methods for checking the bias of sampling

11. ISO 3087:1998 Iron ores -- Determination of moisture content of a lot

12. ISO 3271:2007 Iron ores for blast furnace and direct reduction feedstocks -- Determination of the tumble and abrasion indices

13. ISO 3852:2007Iron ores for blast furnace and direct reduction feedstocks -- Determination of bulk density

14. ISO 4687-1:1992 Iron ores -- Determination of phosphorus content -- Part 1: Molybdenum blue spectrophotometric method

15. ISO 4688-1:2006 Iron ores -- Determination of aluminium -- Part 1: Flame atomic absorption spectrometric method

16. ISO 4689:1986 Iron ores -- Determination of sulfur content -- Barium sulfate gravimetric method

17. ISO 4689-2:2004 Iron ores -- Determination of sulfur content -- Part 2: Combustion/titration method

18. ISO 4689-3:2004 Iron ores -- Determination of sulfur content -- Part 3: Combustion/infrared method

19. ISO 4691:1985 Iron ores -- Determination of titanium content -- Diantipyrylmethane spectrophotometric method

20. ISO 4694:1987 Iron ores -- Determination of fluorine content -- Ion-selective electrode method

21. ISO 4695:2007 Iron ores for blast furnace feedstocks -- Determination of the reducibility by the rate of reduction index

22. ISO 4696-1:2007 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 1: Reduction with CO, CO2, H2 and N2

23. ISO 4696-2:2007 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 2: Reduction with CO and N2

24. ISO 4698:2007 Iron ore pellets for blast furnace feedstocks -- Determination of the free-swelling index

25 ISO 4700:2007 Iron ore pellets for blast furnace and direct reduction feedstocks -- Determination of the crushing strength

26. ISO 4701:2008 Iron ores and direct reduced iron -- Determination of size distribution by sieving

27. ISO 5416:2006 Direct reduced iron -- Determination of metallic iron -- Bromine-methanol titrimetric method

28. ISO 5418-1:2006 Iron ores -- Determination of copper -- Part 1: 2,2'-Biquinolyl spectrophotometric method

29. ISO 5418-2:2006 Iron ores -- Determination of copper -- Part 2: Flame atomic absorption spectrometric method

30. ISO 6830:1986 Iron ores -- Determination of aluminium content -- EDTA titrimetric method

31. ISO 7215:2007 Iron ores for blast furnace feedstocks -- Determination of the reducibility by the final degree of reduction index

32. ISO 7335:1987 Iron ores -- Determination of combined water content -- Karl Fischer titrimetric method

33. ISO 7764:2006 Iron ores -- Preparation of predried test samples for chemical analysis

34. ISO 7834:1987 Iron ores -- Determination of arsenic content -- Molybdenum blue spectrophotometric method

35. ISO 7992:2007 Iron ores for blast furnace feedstocks -- Determination of reduction under load

36. ISO 8263:1992 Iron ore fines -- Method for presentation of the results of sintering tests

37. ISO 8371:2007 Iron ores for blast furnace feedstocks -- Determination of the decrepitation index

38. ISO 9035:1989 Iron ores -- Determination of acid-soluble iron(II) content -- Titrimetric method

39. ISO 9507:1990 Iron ores -- Determination of total iron content -- Titanium(III) chloride reduction methods

40. ISO 9516-1:2003 Iron ores -- Determination of various elements by X-ray fluorescence spectrometry -- Part 1: Comprehensive procedure

41. ISO 9517:2007 Iron ores -- Determination of water-soluble chloride -- Ion-selective electrode method

42. ISO 9682-1:1991 Iron ores -- Determination of manganese content -- Part 1: Flame atomic absorption spectrometric method

43. ISO 9682-2:2006 Iron ores -- Determination of manganese content -- Part 2: Periodate spectrophotometric method

44. ISO 9683-1:2006 Iron ores -- Determination of vanadium -- Part 1: BPHA spectrophotometric method

45. ISO 9684:1991 Iron ores -- Determination of vanadium content -- Flame atomic absorption spectrometric methods

46. ISO 9685:1991 Iron ores -- Determination of nickel and/or chromium contents -- Flame atomic absorption spectrometric method

47. ISO 9686:2006 Direct reduced iron -- Determination of carbon and/or sulfur -- High-frequency combustion method with infrared measurement

48. ISO 10203:2006 Iron ores -- Determination of calcium -- Flame atomic absorption spectrometric method

49. ISO 10204:2006 Iron ores -- Determination of magnesium -- Flame atomic absorption spectrometric method

50. ISO 10835:2007 Direct reduced iron and hot briquetted iron -- Sampling and sample preparation

51. ISO 10836:1994Iron ores -- Method of sampling and sample preparation for physical testing

52. ISO 11256:2007 Iron ore pellets for shaft direct-reduction feedstocks -- Determination of the clustering index

53. ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks -- Determination of the low-temperature reduction-disintegration index and degree of metallization

54. ISO 11258:2007 Iron ores for shaft direct-reduction feedstocks -- Determination of the reducibility index, final degree of reduction and degree of metallization

55. ISO 11323:2002 Iron ore and direct reduced iron -- Vocabulary

56. ISO 11459:1997 Iron ores -- Certified reference materials -- Preparation and certification for use in chemical analysis

57. ISO 11533:1996 Iron ores -- Determination of cobalt content -- Flame atomic absorption spectrometric method

58. ISO 11534:2006 Iron ores -- Determination of tin -- Flame atomic absorption spectrometric method

59. ISO 11535:2006 Iron ores -- Determination of various elements -- Inductively coupled plasma atomic emission spectrometric method

60. ISO 13310:1997 Iron ores -- Determination of zinc content -- Flame atomic absorption spectrometric method

61. ISO 13311:1997 Iron ores -- Determination of lead content -- Flame atomic absorption spectrometric method

62. ISO 13312:2006 Iron ores -- Determination of potassium --- Flame atomic absorption spectrometric method

63. ISO 13313:2006 Iron ores -- Determination of sodium -- Flame atomic absorption spectrometric method

64. ISO 13930:2007 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by dynamic method

65. ISO 15633:2009 Iron ores -- Determination of nickel -- Flame atomic absorption spectrometric method

66. ISO 15634:2005 Iron ores -- Determination of chromium content -- Flame atomic absorption spectrometric method

67. ISO 15967:2007 Direct reduced iron -- Determination of the tumble and abrasion indices of hot briquetted iron (HBI)

68. ISO 15968:2000 Direct reduced iron -- Determination of apparent density and water absorption of hot briquetted iron (HBI)

69. ISO 16042:2007 Iron ores -- Guidelines for the use of certified reference materials (CRMs)